Skip to main content
esumarc

Resume Examples

Welder resume examples.

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

Build My CVImport Existing CV

Poise template · 1 of 204

What a welder resume needs

The example beside this is built from the duties and skills most often reported for welders, cutters, solderers, and brazers. Every line below is editable in the builder, and the bracketed placeholders are there for you to fill in with your own numbers.

Also advertised as

Wirer • Welder • Solderer • Brazer • Assembly Line Brazer • Fabrication Welder

Build my resumeCheck my resume

A complete welder resume example

Written in full for one person and one job search, and drawn in the template it ships with. The notes beside it say what the resume does well.

Callum Reid's Coded Welder Fabricator resume in the Mica template

Mica template

Callum Reid, Coded Welder Fabricator

Callum Reid is a coded welder fabricator in Glasgow seven years into the trade, from structural steel at a fabrication shop to pressure vessels at a coded shop, and is applying for a senior welder post where he would also train apprentices. A workshop manager hiring at that level reads for the codes held, the repair rate and who the welder has brought on, so each of those has its own line.

Why this resume works

  • The profile names the processes and the standard, MIG, TIG and MMA coded to ISO 9606-1, in its first sentence.
  • Major Achievements is a section the writer added under the same grey bar as the rest, opening on a repair rate cut from 4.5% to 1.2% and how it was done.
  • The current role states the repair rate against the shop target, 1.2% against 3%, which is the figure a quality lead checks first.
  • The earlier role gives the tolerance worked to, within 2 mm from cutting lists, the fit-up evidence behind the step up to coded work.
  • Eight skills sit two across behind diamonds, each named the way a welding advert names it, from 6G-ready TIG to the CSCS card.
Build mine in MicaAbout this template

Summary examples

The opening paragraph does the most work on a resume. Pick the one that matches where you are, then make the specifics yours.

Early career

0–2 years, or changing field

Leads with training and transferable strengths.

  1. Option 148 words

    A Welder prepared through formal training and entry-level shop experience who applies hand welding, flame cutting, and soldering techniques to fabricate and repair metal components. Comfortable with material preparation, alignment, and basic inspection using straightedges and templates while following shop safety practices and operating common hand power tools.

  2. Option 246 words

    A Welder who develops soldering and brazing assemblies for delicate or thin materials using precision soldering equipment and appropriate fluxes. Performs hole filling, seam sealing, and gentle metal buildup while controlling heat input to preserve base metal properties and ensure leak tightness on pressure containing components.

  3. Option 348 words

    With a foundation in flame cutting and thermal cutting methods, a Welder prepared to set up and operate oxy fuel, plasma, or cutting torches for sectioning and beveling metal components. Aligns parts for subsequent welding and prepares edges to meet specified groove profiles while following shop cutting charts.

Mid career

3–8 years in the role

Leads with years of experience and proven skills.

  1. Option 150 words

    A Welder with [X] years of experience in shielded metal arc and gas metal arc welding who performs welds in flat, vertical, and overhead positions. Skilled at selecting filler rods, setting torch tips, and adjusting gas flow to match welding chart specifications while producing sound welds that meet fabrication tolerances.

  2. Option 243 words

    A Welder with [X] years of experience in inspection and quality control who examines workpieces for defects and measures components with micrometers, calipers, and templates. Proficient at detecting faulty equipment operation and documenting nonconformances to maintain production continuity and compliance with dimensional specifications.

  3. Option 344 words

    A Welder with [X] years of experience in pipe and structural alignment who positions and secures heavy workpieces with hoists, cranes, and banding equipment. Skilled at fixture selection and clamp sequencing to hold tolerances during multi-pass welds and to reduce distortion during cooldown cycles.

Senior

8+ years, or leading a team

Leads with scope, leadership, and results.

  1. Option 144 words

    An experienced Welder supervisor who leads shop teams in production scheduling, process standardization, and safety program administration while applying metallurgy and welding procedure knowledge. Oversees equipment selection, torch and electrode standards, and preheat protocols to increase throughput and maintain weld quality across multiple projects.

  2. Option 248 words

    A Senior Welder responsible for welding operations strategy and training who develops welding charts, fixture setups, and inspection criteria for complex fabrications. Manages resources, coordinates with maintenance on torch and regulator performance, and mentors junior staff to raise skill levels and reduce rework rates across the shop floor.

  3. Option 342 words

    A Lead Welder who administers shop safety programs, enforces hot work permits, and coordinates industrial fire suppression readiness across multiple work areas. Establishes permit routines and emergency response procedures while supervising hazard assessments and personal protective equipment protocols to reduce incident exposure.

Work-history bullets

Recruiters scan for duties they recognise, then stop on the ones that stand out. A good resume carries both.

Duties employers expect

The responsibilities most often reported for welders, cutters, solderers, and brazers.

  • Welded components for [X] production units in flat, vertical, and overhead positions.
  • Examined workpieces for defects and measured them against straightedges and templates.
  • Selected and installed torches, filler rods, and flux according to welding chart specifications.
  • Prepared material surfaces before welding, removing scale, rust, and grease.
  • Aligned and clamped workpieces using rules, squares, and hand tools before welding.
  • Analyzed blueprints and work orders to plan layout, assembly, and welding operations.
  • Monitored fitting and welding processes to prevent overheating, warping, and distortion.
  • Operated personal protective equipment and gas monitors during welding shifts to maintain shop safety.

Lines that set you apart

Less common, and more likely to earn a second read.

  • Welded aluminum, stainless steel, and cast iron using techniques suited to each alloy.
  • Repaired products by dismantling, straightening, and reassembling parts with cutting torches.
  • Developed templates and models for welding projects based on blueprint calculations.
  • Reduced rework by [X]% through more consistent bevel and fit-up preparation.
  • Ground and buffed edges of workpieces to ensure a snug fit before final welding.
  • Implemented controlled preheat procedures for high carbon steels to reduce cracking during welding.
  • Performed industrial fire suppression drills and maintained extinguisher checks for emergency readiness.
  • Fabricated custom fixtures and clamps to improve part fit-up and reduce repositioning time by [X]%.

Skills to list

Applicant tracking systems match on wording, so use the terms the job ads use. Only claim what you can back up in an interview.

Role-specific skills

The technical and practical skills tied to this job.

  • Microsoft Excel
  • Microsoft Office software
  • Microsoft Outlook
  • Microsoft Windows
  • Oracle Database
  • EZ Pipe
  • Fred's Tip Cartridge Picker
  • IBM Notes
  • OmniFleet Equipment Maintenance Management
  • Recordkeeping software
  • Scientific Software Group Filter Drain FD
  • Value Analysis

Transferable skills

Strengths that carry across roles and industries.

  • Quality Control Analysis
  • Monitoring
  • Critical Thinking
  • Judgment and Decision Making
  • Operations Monitoring
  • Time Management
  • Active Listening
  • Operation and Control
  • Speaking
  • Complex Problem Solving
  • Reading Comprehension
  • Troubleshooting

Templates for this resume

The guide's example above opens in one layout and pages through the rest. These are the same templates with the detail on what each one does with your sections.

Written and reviewed by the Resumarc teamHow we write our guidance

Contains information from the O*NET Database v30.3 by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA), used under the CC BY 4.0 license. Content has been modified from the original.